| products
| Eriez | Magnetic Separation |
| |
Magnetic,
Vibratory and Metal Detection Solutions |
MAGNETIC
SEPARATION |
The
use of magnets for removing ferrous contaminants in an industrial
environment first began in the 1940s when Eriez founder, Orange
F. Merwin, developed a flat magnetic product to help farmers
trap and remove metal contaminants from their grain chutes.
Orange's early version of today's plate magnet was a huge
success and led to the founding of Eriez Magnetics. After
more than 60 years, Eriez remains the world's authority in
magnetic separation solutions for industry. |
| GRATE
MAGNET |
|
PLATE
MAGNET |
|
|
Grate
Magnets consist of one-inch diameter magnetic tubes in a
grid formation designed to allow feed material to cascade
through the grate, effectively spreading magnetic protection
through the cross sectioned area of a pipe, chute or hopper.
Ceramic and Rare Earth designs are available, as well as
Easy To Clean and Automatic Clean Grate Magnets In Housings.
|
|
Plate
Magnets are used in the bottom of an inclined chute or suspended
above a thin burden of material on a belt conveyor or stainless
steel vibratory feeder to remove occasional pieces of ferrous
contamination. Self cleaning plate magnets, as well as Magnetic
Hump, Round Pipe Separator, and Deep Reach Separator designs
are also available. |
|
| |
|
| MAGNETIC
TRAP |
|
RF
CARTRIDGE MAGNET |
|
|
Magnetic
Traps employ the same powerful tube magnet used in Eriez
Grate assemblies but are specifically designed for liquid
product flows. The traps are available in a variety of designs
but basically include an inlet port to match the existing
pipeline, a magnetic element to collect the tramp metal
contamination, then a transition back to the existing pipe.
Ceramic and Rare Earth designs available.
|
|
The
Radial Field (RF) Cartridge Magnet is ideal for pneumatic
flows of ingredients typically conveyed with air from a rail
car. The assembly is designed to match the existing pipe and
is then transitioned to a large pipe that incorporates an
enclosed magnet element. The material cascades around the
magnet and ferrous material collects on the magnet as it is
conveyed through the assembly. |
|
| |
|
| MAGNETIC
PULLEY & DRUM |
|
SUSPENDED
MAGNET |
|
|
Magnetic
Pulleys replace standard conveyor head pulleys and effectively
convert the conveyor into a self cleaning magnetic separator.
Drum Magnets are self-cleaning magnet assemblies that continuously
remove tramp metal from a product flow. Ceramic and Rare
Earth designs are available.
|
|
Suspended
Magnets are designed to hang above conveyors to remove ferrous
material from the burden of material on the conveyor as it
passes under the magnet. Permanent and Electromagnetic Suspended
Magnets are available in manual or self-cleaning designs.
|
 |
| |
|
| |
Please
contact us for further information.
B & H Industrial Products, Inc.
PO Box 68004
Indianapolis, IN 46268
317.872.5806 | 317.875.5649 Fax
|
|
|
|
|
|
|
|
|
|
