LOADS STORAGE BINS AND HOPPERS COMPLETELY; SAVES TIME
AND LABOR,
VIRTUALLY ELIMINATES SEGREGATION.
The Metalfab Spin-Loader lets you utilize bulk storage facilities
to their fullest capacity. It eliminates the pyramiding which
occurs when powders, flakes and granular materials are loaded
into bins, hopper cars and piles, and enables you to load
up to 15% more product into virtually any storage facility
without costly hand labor or interrupting flow. Spin-Loader
distributes the product evenly in a 360° arc.
Compact, ruggedly-built Spin-Loader can handle up to 200,000
lbs. of dry bulk material an hour. It is simple to install
and easy to operate, and may be mounted to the top of the
bin or attached to a flexible loading spout and placed inside
or over the bin itself. The entering material flows through
the tube of the Spin-Loader to a motorized, spinning disc
which directs it to the outer walls of the bin, permitting
each bin or compartment to be filled to its maximum capacity.
This method of redirecting the particles greatly reduces the
possibility of particle segregation, enabling the particles
to intermix. And, since the entire loading system may be completely
enclosed, product waste and contamination are eliminated.
Standard sizes include an 8 5/8-inch diameter inlet with a
2 HP motor and a 10 3/4-inch diameter inlet with a 5HP motor.
STORAGE BINS & RAIL CARS
Conventional loading forms pyramid; up to 15% of bin capacity
is unused.
Spin Loader directs material to bin walls, filling it completely.
Particles are more evenly distributed. |
|
|
