B & H Industrial Products, Inc. | Thayer Scale


Speed Measurement Accurate belt speed measurement requires the use of a precision wheel or pulley in contact with the tension side of the belt in the area where the scale weighbridge is located. The Thayer Scale belt travel pulser assembly is located underneath the load carrying side of the belt in the area where the weighbridge is located. The belt in this area is stretched and under load. Measurements at any other location on the belt , such as with pulleys in contact with the slack strand of the belt or tail pulleys, are subject to belt stretch errors.

RF Belt Scales take the work out of calibration

Patented calibration method utilize a controlled belt travel interval, makes one-shot adjustment possible. Material totalization data is not affected by calibration runs. Unique test weight system eliminates the need for test chains.


	Manufacturers Representative for Process Equipment since 1976..