Compressed air is hot
and full of moisture as it leaves the compressor. Van
Air aftercoolers rapidly cool this hot compressed air
to reduce the moisture load on downstream equipment.
This results in the most efficient operation of your
dryer.
• At rated capacity, Van Air separators remove
approximately 99% of the condensed moisture and
•
maintain
this effectively down to 20% of rated capacity
•
Standard
capacities range from 100 CFM to 25,000 CFM
•
Offered
in both horizontal and vertical configurations
•
High pressure
water-cooled units available for up to 2,000 PSIG
•
All fabricated
separators are ASME coded
|
| AIR-COOLED
AFTERCOOLERS |
AC Series
Aftercoolers
Van Air AC Series Air-Cooled Aftercoolers utilize free
and readliy available atmospheric air as the cooling
medium. Standard models are rated to 3500 SCFM. |
|
| |
|
Climate-Cool®
Aftercoolers
Climate-Cool® air-cooled aftercoolers, for outdoor
installation, use atmospheric air to dissipate heat.
No water or electricity is used in cooling and there
are no moving parts. Standard models are rated to 4300
SCFM. |
|
| |
|
| WATER-COOLED
AFTERCOOLERS |
Hydro-Cool®
Aftercoolers
Hydro-Cool® water-cooled aftercoolers are available
for installations where water is the desired cooling
medium. Hydro-Cool® aftercoolers are capable of
supplying approach temperatures as low as 5°. F.
Models are available for flows up to 11,000 SCFM. |
|
| |
|
|
|
|
