Van
Air has specialized in compressed air purification for over
60 years. Our compressed air filters have become an industry
leader in protecting compressed air dryers, equipment, instrumentation,
and processes. Van Air F200 Series compressed air filter housings
have set the bar in quality and efficiency to meet today's
air filtration needs.
All
Van Air F200 Series filter housings are cast aluminum and
coated with an epoxy powder coating to resist corrosion.
The filter head also includes a pop-up differential indicator
as standard equipment. This differential indicator is used
as a visual indicator of when the filter element needs to
be changed. With 14 housing sizes, 9 types of filtration
grades, and a maximum working pressure of 250 PSIG at 225°
F, our F200 Series filters will satisfy the most unique
and demanding needs.
Our
F200 Series compressed air filter housings are capable of
automatic or manual draining. All F200 Series housings are
equipped with a ball type manual drain valve as standard
equipment. However, a Van Air automatic drain valve can
be installed to automatically drain the filter when needed.
This will prevent the filter housing from flooding, causing
filter element damage and contaminating the air system.
Additional accessories for the F200 Series compressed air
filter housings include other differential pressure indicators,
wall mounting kits, and connector kits.
SELECTING A FILTER
To select
the appropriate filter, determine the following conditions
regarding the filter installation site:
• Maximum flow rate
• Min. and Max. operating pressures
• Operating temperature
• Pipe size
• Degree of filtration desired
• Contaminants to be removed
Next, refer to the Flow Capacities chart below and locate
the column with your lowest operating pressure. Then find
the flow rate closest to, but greater than, that of your
system. Finally, read across to the left-hand column to
determine the filter model that will meet your needs.
You will now need to refer to the Filtration
Grades chart, also located below. Determine the element
grade that meets your needs. Be sure that the maximum inlet
temperature listed on the chart is sufficient for your operating
conditions.
Refer
to the Dimensions and Specifications chart and locate the
proper filter model number. Once you have located the model
number within the chart, verfiy that the inlet and outlet
connections are suitable for your piping. Also make sure
that there will be adequate clearance for element replacement.
FLOW
CAPACITIES - SCFM
| Model
|
25
PSIG |
50
PSIG |
75
PSIG |
100
PSIG |
125
PSIG |
150
PSIG |
175
PSIG |
200
PSIG |
225
PSIG |
250
PSIG |
|
F200-15-1/4 |
8 |
11 |
13 |
15 |
17 |
18 |
20 |
21 |
23 |
24 |
|
F200-25-3/8 |
13 |
18 |
22 |
25 |
28 |
31 |
33 |
35 |
38 |
40 |
|
F200-25-1/2 |
13 |
18 |
22 |
25 |
28 |
31 |
33 |
35 |
38 |
40 |
|
F200-55-1/2 |
28 |
39 |
48 |
55 |
62 |
67 |
73 |
78 |
83 |
87 |
|
F200-85-3/4 |
43 |
60 |
74 |
85 |
95 |
104 |
112 |
120 |
128 |
134 |
|
F100-25-1 |
50 |
71 |
87 |
100 |
112 |
122 |
132 |
141 |
150 |
158 |
|
F200-150-1 |
75 |
107 |
131 |
150 |
168 |
183 |
198 |
212 |
225 |
237 |
|
F200-265-1-1/4 |
133 |
188 |
231 |
265 |
297 |
323 |
350 |
374 |
398 |
419 |
|
F200-350-1-1/2 |
175 |
249 |
305 |
350 |
392 |
427 |
462 |
494 |
525 |
553 |
|
F200-400-2 |
200 |
284 |
348 |
400 |
448 |
488 |
528 |
564 |
600 |
632 |
|
F200-500-2 |
250 |
355 |
435 |
500 |
560 |
610 |
660 |
705 |
750 |
790 |
|
F200-600-3 |
300 |
426 |
522 |
600 |
672 |
732 |
792 |
846 |
900 |
948 |
|
F200-800-3 |
400 |
568 |
696 |
800 |
896 |
976 |
1,056 |
1,128 |
1,200 |
1,264 |
|
F200-1000-3 |
500 |
710 |
870 |
1,000 |
1,120 |
1,220 |
1,320 |
1,410 |
1,500 |
1,508 |
FILTRATION
GRADES
|
Application |
Element
Grade |
Purpose
|
Nominal
Particulate
Removal |
Element
Flow
Direction |
End
Cap
Color Code |
Aerosol
Removal
(Liquids) |
AA |
Extra Coarse Coalescing |
25.0 m |
IN / OUT |
Black |
|
A |
Coarse Coalescing |
5.00 m |
IN / OUT |
Green |
|
B |
General Purpose
Coalescing |
1.00 m |
IN / OUT |
Red |
|
C |
High Efficiency
Coalescing |
0.01 m |
IN / OUT |
Blue |
Solid
Particulate
Removal |
RAA |
Extra Coarse Coalescing |
25.0 m |
OUT / IN |
Black |
|
RA |
Coarse Coalescing |
5.00 m |
OUT / IN |
Green |
|
RB |
General Purpose
Coalescing |
1.00 m |
OUT / IN |
Red |
|
RC |
High Efficiency
Coalescing |
0.01 m |
OUT / IN |
Blue |
|
HT |
High Temperature
Particulate |
1.00 m |
OUT / IN |
Zinc Plate
or
Galvanized |
Oil
Vapor
Removal |
RD |
Vapor Adsorbing |
0.01 m |
OUT / IN |
Black |
| Maximum
Working Pressure |
| All
Models |
250
PSIG |
| |
| Operating
Temperature |
| Minimum |
35°
F |
| Maximum |
150°
F |
|
| Maximum
Inlet Temperature |
| AA,
A, RAA, RA, RB, & RC Series |
225°
F |
| B
Series |
175°
F |
| C
Series |
125°
F |
| RD
Series |
80°
F |
|
DIMENSIONS
AND SPECIFICATIONS
| Model
|
Flow1
(SCFM) |
In
/ Out
Conn. (NPT) |
A |
B |
C2 |
D |
Weight3
(lbs) |
|
F200-15-1/4-* |
15 |
1/4"
|
2 3/16 |
1 5/8 |
9 1/4 |
3 |
1.4 |
|
F200-25-3/8-* |
25 |
3/8"
|
2 3/16 |
1 5/8 |
9 1/4 |
3 |
1.4 |
|
F200-25-1/2-* |
25 |
1/2"
|
2 3/16 |
1 5/8 |
9 1/4 |
3 |
1.4 |
|
F200-55-1/2-* |
55 |
1/2"
|
3 7/16 |
1 5/16 |
11 3/4 |
4 |
3.5 |
|
F200-85-3/4-* |
85 |
3/4"
|
4 15/16 |
1 5/8 |
14 9/16 |
4 |
6.2 |
|
F200-100-1-* |
100 |
1" |
4 15/16 |
1 5/8 |
14 9/16 |
4 |
6.3 |
|
F200-150-1-* |
150 |
1" |
4 15/16 |
1 5/8 |
20 7/16 |
6 |
7.6 |
|
F200-265-1-1/4-* |
265 |
1 1/4" |
4 15/16 |
1 5/8 |
20 7/16 |
6 |
7.7 |
|
F200-350-1-1/2-* |
350 |
1 1/2" |
5 5/16 |
2 1/16 |
21 3/8 |
6 |
9.8 |
|
F200-400-2-* |
400 |
2" |
5 5/16 |
2 1/16 |
21 3/8 |
6 |
9.8 |
|
F200-500-2-* |
500 |
2" |
5 5/16 |
2 1/16 |
29 3/8 |
6 |
12.2 |
|
F200-600-3-* |
600 |
3" |
7 7/8 |
2 3/4 |
24 1/2 |
8 |
22.5 |
|
F200-800-3-* |
800 |
3" |
7 7/8 |
2 3/4 |
30 1/16 |
8 |
25.5 |
|
F200-1000-3-* |
1,000 |
3" |
7 7/8 |
2 3/4 |
34 3/4 |
12 |
32.4 |
* Insert
appropriate filtration grades here.
1 Flow is based on SCFM @ 100 PSIG @ 100°
F.
2 Weight includes housing and elements.
• Due to continuous improvement, dimensions and specifications
may change without notice.
• Request certified drawing before pre-piping.
