Van
Air MHL Series mini heatless regenerative compressed air dryers
are designed to protect pneumatic equipment and processes
from the harmful and costly effects of compressed air moisture
in extremely low flow applications. Our MHL Series air dryers
provide a -40° or -65° F dew point while operating
between 10 to 25 SCFM.
Since
there is no external heat source, our MHL Series mini heatless
regenerative compressed air dryer uses a percentage of the
dry purge air to regenerate the wet desiccant in the other
tower. With simple twist-off desiccant cartridges, the MHL
Series compressed air dryer is dependable and very easy
to maintain. The purge flow of the air dryer can easily
be adjusted for maximum operating efficiency. The portability
and easy maintenance make the MHL Series mini heatless regenerative
compressed air dryer an excellent choice for use with machine
tools, mining equipment, packaging devices, laboratory equipment,
and many other applications.
•
10 to 25 SCFM
• Ideal for OEM, Lab and Point-of-Use Applications
• -40° F or -65° F Pressure Dew Point
•
Ease of Maintenance...
•
No need to disconnect piping, or fill desiccant towers.
Simply unthread
•
and replace with prepacked desiccant towers.
•
Easy Integration into your Package or Installation...
•
Three inlets and three outlets allow for convenient
installation.
Dimensions
and Specifications - Inches and Pounds |
 |
| Model
|
A
|
B
|
C
|
Inlet
/ Outlet |
Total
Weight |
|
MHL-10 |
19 |
10 |
6 |
1/2
- 14 NPTF |
17 |
|
MHL-25 |
23 |
10 |
6 |
1/2
- 14 NPTF |
24 |
|
|
•
Due to continuous improvement, dimensions, and specifications
may change without notice.
• Request certified drawing for pre-piping.
|
|
Maximum
Capacities - SCFM for -40° F |
| Model
|
60
PSIG |
80
PSIG |
100
PSIG |
125
PSIG |
150
PSIG |
|
MHL-10 |
6.5 |
8.3 |
10 |
10 |
10 |
|
MHL-25 |
16 |
21 |
25 |
25 |
25 |
|
Operating
Conditions |
Minimum |
Maximum |
| Pressure |
60
PSIG |
150
PSIG |
| Inlet
Air Temp. |
40°
F |
120°
F |
| Ambient
Air Temp. |
40°
F |
120°
F |
|
| *
Maximum capacities based on 100 PSIG, 100° F inlet
and 100% RH. |
|
Recommended
Air Filters |
|
Model |
Pre-Filter |
After-Filter |
|
MHL-10 |
F200-15-1/4-C |
F200-15-1/4-RB |
|
MHL-25 |
F200-25-1/2-C |
F200-25-3/2-RB |
|
| Lubricated
Compressors - Dryer
must be equipped with proper Van Air pre-filters.
These filters must be drained and maintained as specified.
Desiccant beds should be checked periodically and
replaced if contamination has occured. Failure to
do so may result in hazardous operating conditions
and will void the warranty. An after-filter should
be installed downstream of the dryer to prevent desiccant
particle migration.
Non-lubricated
Compressors - A particulate or coalescing
pre-filter is recommended to prevent pipe scale and
dust from fouling the dryer. An after-filter should
be installed downstream of the dryer to prevent desiccant
particle migration. |
