Van Gas Technologies' GasDry Max™ is the most aggressive absorbent deliquescent desiccant for use with single and twin tower natural gas dryers on the market. The GasDry Max wet bed desiccant is a hard tablet formed from hygroscopic materials that attract and hold moisture. GasDry Max desiccant is non-toxic and completely soluble in water.
As the GasDry Max desiccant tablet pulls water vapor out of the natural gas, the surface of the desiccant tablet slowly dissolves and forms this solution until the tablet is entirely consumed. When used in properly sized single or twin tower desiccant gas dryer, GasDry Max will remove sufficient moisture vapor to establish a 13% RH in the gas line.
Recommended for use where the operating temperature is at or below 100° F. When applied in higher operating temperatures, a pre-bed of ceramic bead support is recommended to minimize channeling in the desiccant bed.
GasDry Max
Desiccant Physical Properties |
| Color
and form |
White
tablet |
| Size |
1"
diameter x 3/4" height |
| Bulk
Density |
60
+/- 3 lbs/cu.ft. |
| Average
Break Pressure |
100
- 120 lbs |
| Average
PH of Solution |
6.5
to 7.0 |
| Critical
RH |
13% |
GasDry Max Desiccant Dew Point Performance |
Inlet
Temperature (saturated) |
Outlet
Dew Point |
Dew
Point Depression |
100°
F |
37°
F |
63°
F |
90°
F |
30°
F |
60°
F |
80°
F |
23°
F |
57°
F |
70°
F |
16°
F |
54°
F |
60°
F |
9°
F |
51°
F |
50°
F |
2°
F |
48°
F |
40°
F |
-5°
F |
45°
F |
| GasDry Max Desiccant Benefits |
•
Long lasting
• Non-caking
• Completely soluble
• Non-toxic desiccant
• Non-hazardous desiccant
