Van Gas Technologies' GasDry Peak™ is an absorbent deliquescent desiccant forumulated for single and twin tower natural gas dryers. The wet bed desiccant is a hard tablet formed from hygroscopic materials that attract and hold moisture. GasDry Peak desiccant is non-toxic and completely soluble in water.
As the GasDry Peak desiccant tablet pulls water vapor out of the natural gas, the surface of the desiccant tablet slowly dissolves and forms this solution until the tablet is entirely consumed. When used in properly sized single or twin tower desiccant gas dryer, GasDry Peak will remove sufficient moisture vapor to establish a 33% RH in the gas line.
Recommended for use where the operating temperature is at or below 80° F. Gas Dry Peak desiccant is specifically designed to be used as a first stage adsorbent desiccant in the natural gas dehydration process. This deliquescent desiccant is also recommended for point of use applications. When applied in higher operating temperatures, a pre-bed of ceramic bead support is recommended to minimize channeling in the desiccant bed.
GasDry Peak
Desiccant Physical Properties |
| Color
and form |
White
tablet |
| Size |
1"
diameter x 3/4" height |
| Bulk
Density |
55
+/- 3 lbs/cu.ft. |
| Average
Break Pressure |
60
- 100 lbs |
| Average
PH of Solution |
6.5
to 7.0 |
| Critical
RH |
33% |
GasDry Peak Desiccant Dew Point Performance |
Inlet
Temperature (saturated) |
Outlet
Dew Point |
Dew
Point Depression |
80°
F |
49°
F |
30°
F |
70°
F |
43°
F |
27°
F |
60°
F |
36°
F |
24°
F |
55°
F |
32°
F |
23°
F |
45°
F |
25°
F |
20°
F |
| GasDry Peak Desiccant Benefits |
•
Long lasting
• Non-caking
• Completely soluble
• Non-toxic desiccant
• Non-hazardous desiccant
