The Van Gas single tower adsorption dryer is the ideal dryer for preventing freeze-ups in gas instrumentation such as gas meters, regulators and oxygen sensors. The MD-35 is a compact and versatile gas dryer that will reduce the water content of gas streams to dew points as low as -40 degrees F, virtually eliminating entrained moisture from small or intermittent gas flows.
Designed for gas stream flows up to 50 MSCFD, the Van Gas MD-35 has no power requirements or moving parts, making it suitable for remote installation and explosion proof applications. It is supplied with color indicating, silica gel desiccant which only requires periodic replacement. Manufactured in carbon steel, the gas dryer vessel has a very high corrosion resistance. It is also available in stainless steel construction.
Features
Only Inlet and Outlet connections needed
Moisture Indicator shows desiccant condition
Color Indicating desiccant
Handles Inlet Gas temperatures of 120 F
Supplies -40 F pressure dew point
Benefits
Performs effectively in intermittent flow applications
Only periodic desiccant replacement
Designed for flows up to 35 SCFM
Can be installed indoors or outdoors
Maximum Operating Range Conditions
| Max PSI: 250 |
5 PSIG |
10 PSIG |
20 PSIG |
40 PSIG |
60 PSIG |
80 PSIG |
90 PSIG |
100 PSIG |
125 PSIG |
150 PSIG |
200 PSIG |
250 PSIG |
| CFM |
6 |
7.5 |
10.5 |
17 |
23 |
29 |
32 |
25 |
43 |
50 |
66 |
81 |
The maximum operating ranges for the MD-35 listed above are based on constant flows.
Specifications
Housing: Steel, ASME Sec. VIII, Div. 1
Max Working pressure: 250 PSIG / Minimum: 5 PSIG
Max Inlet Air Temperature: 120 F
Inlet & Outlet: 1" NPT
Vessel Weight: 30 pounds
Indicating Silica Gel Desiccant: 8 pounds
Pressure Differential: Less than 1 PSID at 100 PSIG
Finish: White Enamel
Sight Window: 1/2" Diameter
Volume: 0.18 Cubic Feet
Capacity: 1.35 Gallons
We offer several solutions for instrument gas conditioning and drying. Please contact us for assistance with your particular gas drying application.
