Manufacturers Representative for Process Equipment since 1976..
 
 
 
 
 
 
HomeB & H ProductsRequest For QuoteOrderAbout B & HContact B & H
 
 
 
 
 
products | Van Gas Technologies | Gas Filters | Large Flow Natural Gas Pipeline Filters
LARGE FLOW GAS PIPELINE FILTER HOUSINGS


Van Gas large flow particulate and coalescing gas filters feature nine filter housing models and four element grades that remove water droplets and oil aerosols down to .01 micron. Standard models are available for flows up to 90 MMcfd at 1440 PSIG, with larger capacities and higher pressures available.

All Van Gas large flow filter housings are constructed for carbon steel and are designed with a two-phase separator to prolong filter life through removal of free flowing water and oil. Buth sump areas can be equipped with either manual or automatic drains.

The large flow filter housings are designed to allow filter element replacement through top loading. Closure types include swing-bolt, blind flange and blind flange with davit. This allows for the filter element to be replaced quickly and without the difficulties typically found in bottom loading type housings. The top loading feature of our coalescing and particulate filter housings also eliminates any ground clearance requirements that may be needed when changing the filter elements.

Van Gas Natural Gas Pipeline Filter Dimensions
Model A B1 B2 C D In. / Out.1
Conn.
Total
Weight
GF102-1500-* 18 3/4" 32" 70 3/4" 82" 24" 3" FLG 250 lbs.
GF102-2000-* 18 3/4" 32" 77 1/2" 89 1/2" 30" 4" FLG 325 lbs.
GF102-3500-* 24 3/4" 33 1/2" 78 1/2" 92" 30" 6" FLG 385 lbs.
GF102-5000-* 28" 33 1/2" 78 1/2" 93" 30" 6" FLG 550 lbs.
GF102-7500-* 32" 34 1/2" 80 1/2" 98 1/4" 30" 8" FLG 735 lbs.
GF102-10,000-* 36" 35 1/2" 83 3/4" 104 3/8" 30" 10" FLG 1150 lbs.
GF102-12,500-* 36" 35 1/2" 83 3/4" 104 3/8" 30" 10" FLG 1150 lbs.
GF102-15,000-* 42" 44 1/2" 94 3/4" 117 3/4" 30" 12" FLG 1675 lbs.
GF102-20,000-* 52" 46" 99 1/4" 126" 30" 16" FLG 2300 lbs.

  • There are two 1" NPT drain connections on each filter housing.
  • Flanges are ANSI class 150 R.F.
  • Due to continuous improvement, dimensions and specifications may change without notice.
  • Request certified drawing before pre-piping.
  •  

    Pipeline Gas Dryer

    Instrument Gas Dryer

    Landfill Gas Dryer

    Absorbent Desiccant

    Adsorbent Desiccant

    Gas Filters

     
     
    Please contact us for further information.

    B & H Industrial Products, Inc.
    PO Box 68004
    Indianapolis, IN 46268
    317.872.5806 | 317.875.5649 Fax

     
    B & H Industrial Products, Inc. | PO Box 68004 | Indianapolis, IN 46268 | 317.872.5806 | 317.875.5649 Fax